What drives the price
Concrete slab condition. Uneven slabs, surface cracking, and deep oil stains require diamond grinding and leveling before any epoxy can bond properly. We grind down high spots and fill structural fissures so the coating stays flat.
System type and thickness. A simple single-color floor needs fewer coats than a metallic finish or a heavy grit floor. Extra design steps and clear top coats take more working hours to put down.
Sunlight and UV exposure. Garage entries and covered spots touched by sun need a clear sun-block topcoat to stop yellowing. We roll this top shield on to keep the true color safe from direct rays.
Room size and layout. Small rooms reach our baseline fee because the work spans several days. Each layer needs drying time regardless of the floor area. Multiple trips to clean, prime, and coat small rooms take the same time.
Moisture levels in slab. Slabs sitting right on the dirt often need a damp-barrier primer before the colored resin goes on. Rising damp under unprimed floors will lift the coating off the concrete over time.
Indicative prices
| Job | Indicative range |
|---|---|
| Standard residential epoxy floor per m² | 35-65 € per m² |
| Decorative or metallic epoxy per m² | 75-130 € per m² |
| Subfloor leveling & crack repair per m² | 12-25 € per m² |
| Commercial & heavy-duty epoxy screed per m² | 45-85 € per m² |
| Minimum project callout fee | 950-1,400 € per project |
| UV-resistant aliphatic polyurethane topcoat per m² | 15-30 € per m² |
Prices are indicative guides that vary depending on the concrete condition and final coating specifications.
Getting started takes just a single step.
Response time: 24 hoursSatisfaction guarantee
Worked examples
Double garage floor
A standard two-car home garage of 40 m² with sound concrete. We grind the slab with diamonds and roll on a plain color coat.
Compact utility space
A small basement storage room of 15 m² needs multiple site visits across several days. The floor needs prep work, and each layer must dry.
Villa basement showroom finish
A 60 m² private garage or entertainment area receiving a multi-layer decorative metallic finish with clear protective wear coats.
Damaged workshop slab repair
A 50 m² uneven concrete floor needing crack chasing, patch repairs, and diamond grinding before applying resin primers.
Your questions, answered
Why does a small utility room carry a baseline project rate? +
Epoxy takes multiple site visits across several days for drying. Moving tools and cleaning take equal effort. The drying time stays identical for ten or forty square metres.
How much does concrete preparation and crack repair add to the bill? +
Damaged or uneven slabs require diamond grinding, mortar filling, and crack chasing before receiving paint. We list these preparation steps directly on your written square metre quote.
Why do garage thresholds on the Costa del Sol need UV topcoats? +
Standard epoxy turns yellow and goes brittle under harsh sun. We add a clear UV-blocking top layer across doorways. This shield blocks the sun and keeps your base floor color true.
What makes metallic epoxy finishes cost more than solid colors? +
Artistic floors need special metal powders, careful hand swirling, and extra clear wear layers. Putting these steps down takes more work hours than rolling on a standard plain color.
What happens if I am not happy with the epoxy flooring? +
Satisfaction guarantee. If something we did is not right, we come back and put it right at no cost.